technical data sheet bnc 50 ? bulkhead jack 51K606-001N4 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to iec 60169-8, mil-prf-39012, cecc 22120 documents assembly instruction 51 e panel piercing b 3 material and plating connector parts material plating center contact beryllium copper gold, min. 0.8 m, over nickel outer contact brass flash white bron ze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket silicone/nbr
technical data sheet bnc 50 ? bulkhead jack 51K606-001N4 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 electrical data impedance 50 ? frequency dc to 10 ghz return loss 24 db, dc to 1 ghz 17 db, 1 to 2 ghz insertion loss 0.05 x [ghz] f db, dc to 2 ghz insulation resistance 5 x10 3 m ? center contact resistance 1.5 m ? outer contact resistance 1 m ? test voltage 1500 v rms working voltage 400 v rms power handling (at 20 c, sea level, vswr 1.0) 80 w @ 2 ghz - limitations are possible due to the used cable type - mechanical data mating cycles min. 500 center contact captivation: axial 15 n environmental data temperature range -25c to +110c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. b shock mil-std-202, meth. 213, cond. g moisture resistance mil-std-202, meth. 106 tooling n/a suitable cables rg 196 a/u, rg 178 b/u packing standard 1 pce in bag weight 21.1 g/pce draft date approved date rev. engineering change number name date inge mhlauer 13/07/04 rong fang 18/10/05 b00 05-0566 inge mhlauer 18/10/05 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
